Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 339 (click to view)
Types of trouble and how to correct trouble In the playback mode
Symptom
The picture does not appear on the screen when playing back a tape.*1) The tape does not move when a video control button is pressed. The playback button does not work. There are horizontal lines on the picture. The playback picture is not clear or does not appear.
Cause and/or Corrective Action � The tape is recorded in the Hi8 system.
/Standard 8 mm
� The POWER switch is set to MEMORY, CAMERA or OFF (CHG).*2) c Set it to VCR/PLAYER *2) (p. 45). � The cassette has run out of tape. c Rewind the tape (p. 45). � The television�s video channel is not adjusted correctly. c Adjust it *3) (p. 51). � EDIT is set to ON in the menu settings. c Set it to OFF *3) (p. 214). � The video head may be dirty. c Clean the heads using the Sony V8-25CLD cleaning cassette (optional) (p. 248). � The stereo tape is played back with HiFi SOUND set to 2 in the menu settings.*4) c Set it to STEREO (p. 214). � The volume is turned to minimum. c Press VOLUME + (p. 45). � AUDIO MIX is set to the ST2 side in the menu settings.*4)
No sound or only a low sound is heard when playing back a tape.
The date search does not work correctly.*5) The picture which is recorded in the Digital8 system is not played back.*6) The tape which is recorded in the Hi8 /standard 8 mm system is not played back correctly.*6)
c Adjust AUDIO MIX (p. 214). � The tape has a blank portion between recorded portions (p. 90). � PB MODE is set to / in the menu settings. c Set it to AUTO (p. 215). c Set PB MODE to / in the menu settings (p. 215).
*1) *2) Modes on the POWER switch vary depending on models (p. 16). *3) *4) *5) *6)