Excellent product, very clear print. Detailed circuit and assembly diagrams - this enabled me to repair my CD player with confidence. I highly recommend this site.
Great manual, great price. Has a few of the basic operating instructions that most service manuals leave out. Complete instructions for disassembling board by board, safety precautions, schematics, complete parts list.
Text excerpt from page 10 (click to view)
1-2. Electrical Alignment
Preparation 1. Connect the equipment. 2. Extend the APR-30 board using the extension board EX-592. (Refer to �1-6. Use of Extension Board� in the Maintenance Manual for DSM-T1.) 3. Connect the coaxial cable and harness to the APR-30 board. Coaxial cable : CN100 (A-3) Harness (white) : CN900 (A-6) Harness (red)*1 : CN1100 (A-6)
*1 : Only when the rear panel with 5-pin XLR connector is used.
Adjustment Procedures 1. Supply 100% color-bar signal from the composite video signal generator to the VIDEO connector on the DSM-T1. 2. Adjust RV301 (B-4) on the APR-30 board so that VIDEO OUT of the DSM-R1 is satisfied the specification. Adjustment : 1RV301 (B-4) Specification : A = 700 ± 7 mV
4. Return the menu setting data of the DSM-T1 and the DSM-R1 to the factory setting. (Refer to �3. To return the menu setting data to the factory setting� on the page 1-2.) 5. Turn on the power of the DSM-T1 and warm up the unit about 10 minutes. 6. Set the following menu for DSM-T1. (Refer to the �Menu Setup� in the Operation Manual for DSM-T1.) . �03 : VIDEO STD� : 625 7. Set the following menu for DSM-R1. (Refer to the �Menu Setup� in the Operation Manual for DSM-R1.) . �03: VIDEO STD� : 625 8. Set the synthesized signal generator. . Frequency : 1270 MHz . Out Level : 0.0 dBm