The ervice manual for my 1982 Kenwood KR-1000 receiver is great! Full detail on all circuits with part number detail. I will definately be ordering more manuals for my other vintage equipment! Order was fulfilled quickly! Very efficient ordering process! Thnaks for your help! Great site!
Everything in the manual was excellent except for a couple of pictures of specific areas in the unit that were a little dark. Owners Manuals re-sent the pdf file & the problem was corrected. Excellent product! George
Text excerpt from page 13 (click to view)
1-8. Replacing the Boards
1-8-3. LE-195 Board
1. Remove the front panel. (Refer to Section 1-2.) 2. Remove the power supply unit which contains the LE195 to be replaced. (Refer to Section 1-6.) 3. Remove the one screw at the front side of the power supply unit. 4. Disconnect the connector CN1. 5. Install a new LE-195 board in the reverse order of steps 1 to 4. n To install the LE-195 board, insert a projection of the LE-195 board into the hole in the power supply unit.
1-8-4. LF-46 Board
1. Remove the front panel. (Refer to Section 1-2.) 2. Remove the power supply unit which contains the LF46 board to be replaced. (Refer to Section 1-6.) 3. Disconnect the three connectors (CN2, CN3, and CN4). 4. Remove the four screws, then remove the LF-46 board. 5. Install a new LF-46 board in the reverse order of steps 1 to 4.
PSW 3x8