Wanting to repair a neighbours tape recorder I needed the necessary information, it makes it easier. Although the service manual is described as "Language : English" To my dismay I found that it is entirely written in German, a language I do not understand. At least I now have the schematics which will help of sorts. I may not use this service again due to the laguage difficulty after all when it states English you do not expect it to be entirely in another language.
very poolite and healpful secure transaction thanks allot
Text excerpt from page 12 (click to view)
1-7. Main Parts Replacement
1-7-3. Replacing the SY-266 Board
1. Remove the DIF-74 board. (Refer to Section 1-7-2. But no need for the DVBK-1 removal.) 2. Remove the hexagon screws fixed a REMOTE connector. 3. Disconnect the harnesses from the three connectors (CN1, CN2, and CN6) . 4. Remove the two screws from the chassis. 5. Pull the SY-266 board out to the direction of arrow.
Hexagon Screw
1-7-4. Replacing the SW-988 Board
1. Remove the DIF-74 board. (Refer to Section 1-7-2. But no need for the DVBK-1 removal.) 2. Remove the SY-266 board. (Refer to Section 1-7-3.) 3. Remove the screw, and disconnect the harness from the connector (CN2). 4. Unsolder the SW-988 board to remove it.
PWH2.6 x 5
CN2
CN6
Desoldering Portions PWH2.6 x 5
SW-988 Board
PWH2.6 x 5 SY-266 Board CN1 CN2
6. Attach the replacement SY-266 board in the reverse order of step 1 to 5.
5. Attach the replacement SW-988 board in the reverse order of step 1 to 4.