I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
Text excerpt from page 23 (click to view)
Section 3 Service Overview
3-1. Cleaning
Clean the filter at the inside of the front panel periodically because it apt to catch dust. It is recommended to replace the filter every five years. � Filter (3U) : 2-139-072-03 c If the BDX-E1000 is kept on operating with too dusty of the filter, the temperature inside the unit getting rise. This may cause a fire. 1. Turn the power off. 2. Loosen the locking screw on the front panel using a flat-blade screwdriver. 3. Pull the locking screw toward you and open the front panel.
Tape
6. Fasten the filter to the tape.
Front panel
Tape
Filter
Front panel
Locking screw
4. Peel the filter away from the tape. 5. Clean the dust on the filter using a vacuum cleaner. n If the filter is too much dusty, it is recommended to wash it. When washing the filter, be sure to dry it well.